Vinyl roof is known for years for being a highly-engineered, light-colored, and durable type that has cooled and protected most buildings. This is true in almost all types of climates around the world. Indeed, it is cool as a vinyl roof that brings about economic and environmental benefits. This is also even with no cost premium installed and with no sacrifice for other roofing performance attributes. The vinyl resin consists of less than half of the raw and non-renewable materials of roofing alternatives.
Also, the vinyl roof is available in prefabricated panels or wide rolls. Its single-ply and vinyl membranes are made up of water-resistant and flexible polymers. This polymer material is reinforced with a fiberglass and non-woven mat or even the polyester woven type of scrim. These essential components provide the vinyl roof the needed durability and strength. That’s when the vinyl roof can withstand structural movement, wind loads, thermal cycles, and temperature extremes
Optimized Thermal Performance in a Building
A light-colored or white and single-ply vinyl membrane can achieve the highest emittance and reflectance measures of the roofing material. The reflective materials also reflect 3-quarters of the sunlight rays. This is also far more and this emits ninety-percent of heat as brought about by solar radiation. The vinyl roof is a lot better when compared to the asphalt built-up roof that reflects between six-percent and twenty-six percent of the solar radiation. This results in a greater heat emission to the interior of the building. This also demands more when it comes to air-conditioning. This can thereby strain both the electric power grid and the operating costs.
Cool Energy Savings
Vinyl roof is much cooler offering both long-term and immediate savings in energy costs in most buildings. There also is a peak energy demand as calculated and measured resulting in replacing a black EPDM roof with a white vinyl roof in a retail building.
The vinyl roof brings about an almost eleven-percent decrease in the energy consumption of the air conditioner. There also is a fourteen-percent drop in the peak hour demand. Without thinking much about the utility charges or the tax benefits, the yearly expenditures were greatly reduced by seven cents or 7,200-dollars for every square foot.
The vinyl roof is indeed a cool roof that can bring more impact to the energy cost than the energy use. It also reduced consumption during such a demanding peak power. This is also when rates are somehow the highest.
Flexible Application Methods
The use of vinyl roof material is a good idea. Installers and designers can flexibly apply it while considering insurance requirements and account building code. It can as well be installed on the roof substrate or roof deck in so many ways. For one, it can then be mechanically attached to different fastening systems. It can also be loose laid in the plaza decks or the vegetative roofs. This can also be adhered to with self-adhered membranes or adhesives.
The vinyl roof can provide for a wide range of application methods. This can thereby accommodate differing building design requirements. Thus, it makes sense as the best application method for a building.
Enjoy decades of cool and good design with a vinyl roof. But, of course, more variables are involved in enhancing its long service life. Consider as always the guidance of a Thailand vinyl roof supplier. Complement it with insulation, plates, sealants, authorized adhesives, flashing components, fasteners, and more other accessories. All these combined can enhance the vinyl roof system. Thus, you appreciate it more for its installation and product warranties!
What else is holding you back to consider vinyl roof? Feel free to consider it in its good and cool design!